AIT Racing and B-Magic Body Kits at the lowest prices
Driven By Style LLC has been an authorized retailer for AIT Racing since 2009. We carry the full line of aerodynamics products from AIT Racing and B-Magic. We offer low prices everyday on AIT Racing body kits, fenders, front bumpers, side skirts, rear bumpers, wings, spoilers and more. We also carry carbon fiber parts such as hoods, trunks, hatches, spoilers and more. Our products are shipped direct from the manufacturer ensuring quality products and exceptional service every time. We will match or beat any advertised price and will not be undersold on AIT Racing Body Kits.
AIT Racing offers a full selection of body kits for many popular vehicle makes and models. Most body kits consist of a front bumper cover replacement, pair of side skirts and rear bumper cover replacement. Most AIT Racing body kits are manufactured in high quality fiberglass with glossy gelcoat finish. AI Racing body kits are known for having better than average fitment out of the box compared to most other fiberglass body kits on the market. AIT Racing fiberglass body kits are also reputed to have good finish quality and better than average flexibility to resist shattering upon impact. Check out what we have for your vehicle by clicking into our body kits catalog.
AIT Racing front bumper covers are designed to replace the oem factory body style bumper cover with something more aggressively styled for a very unique appearance. Installing an AIT Racing front bumper consists of disassembling the factory bumper cover and removing it from the vehicle. The stock bumper hardware should be placed aside as some of it may be re-used in the installation process. The new bumper cover will need to be held up to the vehicle and then the mounting holes can be marked using a sharpie marker. Once the mounting holes are marked on the new bumper cover they can be drilled and the bumper can be test fitted on the vehicle. When possible it is good to reuse the factory bumper mounting hardware but in many instances custom brackets should be fabricated to give the new bumper necessary support.
AIT Racing front bumper lips are designed for the customer that wants to freshen the look of their vehicle without committing to replacing the full bumper cover. Front bumper lips still require the stock bumper to be removed from the vehicle for installation. Once the bumper is dismounted from the vehicle the factory bumper can be flexed inward so that the new bumper lip can be installed over the bottom of the bumper. As for attaching the bumper lip to the bumper cover you will be using 3M double sided tape (red automotive grade) and either nuts/bolts or rivets to secure the lip in place. Once the lip is secured to the bumper the bumper can be reinstalled on the vehicle.
AIT Racing side skirts are designed to lower the side profile of the vehicle to match the lower front and rear bumpers. Most side skirts will need some trimming before they will be ready to fit properly. We advise having a helper with you when test fitting side skirts and that you tape off the paint on the vehicle so you do not scratch it during the test fitment. Once the part has been trimmed and held up to the vehicle you will then have to decide on your method of securing the panel to the vehicle. The two most common methods are to use rivets and double sided tape for a removable installation or rivets and panel bonding adhesive for a permanent install. Some applications benefit from having custom brackets fabricated to add additional support.
AIT Racing rear bumper covers just like the front bumpers are designed to replace the oem factory body style bumper cover with something more aggressively styled for a very unique appearance. Installing an AIT Racing rear bumper consists of disassembling the factory bumper cover and removing it from the vehicle. The stock bumper hardware should be placed aside as some of it may be re-used in the installation process. The new bumper cover will need to be held up to the vehicle and then the mounting holes can be marked using a sharpie marker. Once the mounting holes are marked on the new bumper cover they can be drilled and the bumper can be test fitted on the vehicle. When possible it is good to reuse the factory bumper mounting hardware but in many instances custom brackets should be fabricated to give the new bumper necessary support.
AIT Racing fenders are designed to replace the factory front fenders in a bolt on installation. The stock fender needs to be removed usually by removing the front bumper cover and headlights and then removing all the mounting bolts in the engine bay and door jam that secure the fender in place. Once the stock fender is out of the way the new fender can be held in place and then all the mounting holes will need to be marked using a sharpie marker and then carefully drilled out. When mounting an aftermarket fiberglass or carbon fiber fender you want to loosely install all the bolts and then turn attention to panel gap alignment. A good tip is to start at the door jam and set the gap there first and then turn attention to the hood gap. Once alignment is achieved start to secure each bolt until it is tight.
AIT Racing carbon fiber hoods use state of the art manufacturing process called vacuum infusion process. Hoods manufactured in this method use dry carbon fiber placed into a mold and then placed under vacuum before liquid resin is introduced and pulled across the fabric inside the mold. The result is a super light weight part that is rich in detail around body lines and vents and has a proper fiber to resin ratio making the part extremely strong. If you are in the market for a true grade A quality carbon fiber hood check out AIT Racing and B-Magic for what they have to offer for your application.
AIT Racing is known throughout the industry for manufacturing high quality aerodynamics products such as body kits, fenders, spoilers, and carbon fiber hoods. Make sure to look for the logo of authenticity on all officially licensed AIT Racing Products. CLICK HERE to learn more about AIT Racing products.
Important Information About Installation:
Aerodynamics and ground effects are shipped unfinished and require prep-work before painting. Always dry fit your parts before starting any prep work or painting. Some modifications to stock mounting hardware may be necessary and may require some fabrication of brackets and mounting hardware. We advise professional installation at a facility with custom car and body kit experience. We do not advise installation by collision only repair shops.
On any over sized freight truck / tractor trailer deliveries you must inspect all packages immediately in the presence of the delivery person. Do not sign delivery receipt until all parts have been inspected. This means you must open the box and remove each item to inspect it for concealed damage.
Aerodynamics orders may have concealed damage and if not noted at delivery you forfeit your ability to file a claim on the shipping insurance. It is important that you are aware of this and follow this policy to ensure you are fully covered in the event there is a problem. If you find damage to any items in your order please note them on the delivery bill and sign for the package. Please contact us through our customer service claim system described below to start the claim process. Once your claim has been electronically received our staff will process it onto the shipping warehouse from where your order originated for resolution.
MAT PROCESS: Shaping by the MAT process reduces wheel weight by 10%-15%. Every pound of unsprung weight savings has the effect of reducing overall vehicle weight by 20lbs. F1 REPLICA: Enkei is an official supplier of the McLaren Honda Formula One Team. The RPF1 was...Read more
*WHEELS PRICED INDIVIDUALLY* Previously only offered in Japan, the all new Enkei RS05RR featured on the Rocket Bunny FR-S in Japan is now available in the United States. The RS05RR is available in three face types- Type F, Type M, & Type R. Each face design has...Read more
If you are prepping your EK Civic for the track or you are just that hard core, then we have the perfect Dry Carbon piece for you. The Password:JDM Dry Carbon Aero Grille is the ultimate functional item for all the serious EK track junkies. With this product, PWJDM has deleted ...Read more
